Sterilizers

GENERAL FEATURES

Materials :Sterilization chamber, jacket, jenarator AISI 316 L chamber 6mm. 
Jacket and generator Min. 3mm.
Doors :AISI 304 L or 316L 10 mm. 
Inner surface chamber cleanning against collosion danger; Glass shered sandblasting or elektropolisaj method.
Outer covering:AISI 304  or 316 L
Gasket channel monoblock groove and  cover hinge-pin bracket, minimum thickness   50 mm AISI 304 or  316L  stainless steel.

DOOR AND SAFETY SYSTEM

The door is resistant to extreme pressure. Heat insulation materials needed for heat losses are covered. The movement of the door is a vertical axis (down-up) and it works extremely quietly with the pneumatic system. 

Easy loading and unloading operations are carried out with the door which leaves the whole of the sterilization chamber of rectangular shape prism open. In addition, with the safety system preventing sudden opening of the door, the door is prevented from operating without closing the door.

When the door is closed, there is a safety system that prevents any cistern squeeze and allows the door to move in the opposite direction. Pressure and vacuum sealing of the door is provided by silicon based seal which is resistant to the temperature of the device and door sealing is provided by applying vapor pressure to the gasket channel. 

The door sealing gasket can be easily replaced without having to remove any part of the device and the gasket is a maintenance-free type. The door seal's replacement time is automatically displayed on the 7 "video graphic touch screen LCD. In addition, the sterilization room can not open the door without the pressure of the press.

CONTROL PANEL

Full automatic, micropocessor controlled with PLC
Preasure measurement: : -1.0…+5 Bar (+ 0.001 bar)
Heat measurement : 0 ºC .... 150ºC (+ 0.1 ºC)
Visual, written and audio warning system monitoring
Preasure error (vacum), steam error (heat)
Power cut (audio and visula warning)
Ups or Batery System 

PROGRAMME PHASES

Programme name and number
Sterilizaiton phase
Cell, jacket, jenerator and seal preasures
Cell, jacket, jenerator and seal heats
Total sterilization time and remaining time
Sterilization preasure and heat measurements
Sterilization counter
Sterilization steps
Errors and cause of error
Full automatic, PLC control
Optional remote access via ethernet
USB port RS 232 RS485 ETHERNET modül

Preasure measurement : -1.0…+5 Bar (+ 0.001 bar)
Heat measurement : 0 ºC .... 150ºC (+ 0.1 ºC )
Visual, written and audio warning system monitoring
Preasure error (vacum), steam error (heat)
Power cut (audio and visula warning)
Ability to watch the programme phases on computer
Data recording of work done.

THERMAL PRINTER

The thermal type printer located in the control unit is supplied with the following values as the cast:  

Date-time
The name and the name of the program being run
Pre-vacuum time and phase number
Preheating temperature
Sterilization cell temperature
Sterilization cell pressure
Sterilization time
Drying time
Error messages that may occur in the system
Date, time and total time information at the end of the sterilization process
User signature repository at the end of the process.

121 ºC rubber, 121 ºC liquid, 134 ºC solid, 134 ºC textile,
Bowie & Dick Test,
Leakage test,
Optional programming,
Ability to add user programme,
Ability to see all preasure and heat sensors on
Programme and calibration,
Sleep mode and power saving mode,
Automatic start upon user preference.

STEAM INSTALLMENT

Pneumatic solenoid valve : Imported 304 Or 316 stainless steel
Steam trap : Imported 304 Or 316 stainless steel
Safety valve : Sterilizaiton chamber, jacket, jenerator 304 or 316 stainless steel
Vacuum pomp : Imported flow speed 2900 cycle/minute
The discharge of the device is by the heat exchanger system.

Water pomp : Imported 0.75 hp pipe part 304 Or 316 stainless steel
Check Valve : 304 or 316 stainless steel
Steam installment pipes : 304 or 316 stainless steel
Water installment pipes : 304 or 316 stainless steel
Air installment pipes : 304 or 316 stainless steel
Hepa filter : 0.01 μm %99.999
Optional materials : Stainless steel trolley
Stainless steel loading trolley
Software controlled water saving system.